ONAF System Of Transformer Cooling

Transformers are intended to supply current from one circuit to another and come in different sizes and capacity power. Trutech Products is one of the paramount Transformer Manufacturers In India who have the collection of most resourceful and long-lasting devices such as Isolation, Auto, Control Transformers, etc.

Three Phase Transformer Manufacturerz

Overloading and its use without breaks can harm the potential life of the device and cause it to overheat. There are various methods to cool the transformer and one such is ONAF – Oil Natural Air Forced.

Understanding ONAF:

The dissipation of the device can obviously be raised by enhancing the dissipating surface but its cooling can be made faster and smoother with the use of applied forced air flow on the dissipating surface. The fans blow air on the surface to cool it as it takes away the heat from the inside surface of the radiator and provides better cooling as compared to natural air.  The heat dissipation rate is faster in this method so that the transformer can be put back in the normal condition.

There are multiple other methods that can help in cooling of the transformer. But if your product has been damaged beyond repair, then it is the time to get in touch with one of the leading Transformer Manufacturers such as Trutech Products and ask to be served with the transformers that fit your industrial needs perfectly. Our executives will help you with every specification related to the product. Call us to know more.

Advertisements

Bells And Whistles Of An Auto Transformer

Transformers are essential that are required in multiple industries so that the production does not get paused due to the defaults and electricity failures. If you want to invest in the devices that have all the bells and whistles to meet your industry requirements, then you must consider making your purchase from one of the venerated Transformer Manufacturers In IndiaTrutech Products. The stalwart employees that we have with us make use of the leading edge technology and make the best and imperative systems.

Transformer

Auto Transformers are one of the diverse kinds of transformers that have some amazing features attached to it. Its features can be listed as follows:

  • This device requires only one winding, unlike the rest of transformers which comes with two winding, namely – Primary and Secondary.
  • This device is more efficient in terms of performance and requires very low excitation current as compared to the conventional transformers.
  • It makes the varying of voltage easier and smoother.
  • The same VA rating that an Auto Transformer requires less amount of copper, iron and low current.
  • Due to its inevitable merits and consequential features, it is used in applications like speakers, boosters and amplifiers. It is also used with induction motors and in AC feeders.

Get in touch with one of the formidable Transformer Manufacturers like Trutech Products if you wish to receive genuine and highly efficient devices at a bargains rate. Call us to know the specifications and details, etc.

Transformer FAQ’s – To Solve Out Your Queries

Control TransformerYou must have heard people talking about transformers but do you know what this static device is and how it can benefit you. Well, if your answer is no like many others, here’s your search end. Being a Transformer Manufacturers, we are here with a FAQs section that will surely answer a few of your questions and allow you to make a wise buying decision.

What Is A Transformer?

It is a static device which is designed to use for the purpose of transmitting power from one circuit to another. It makes no change in frequency level and fulfils the need of power supply in your industry.

What Are Its Common Components?

Input/output connections, windings, cores are some of the common components that every static device have and the working of the device depends totally on them.

Do They Generate Power?

“NO” Transformers do not generate power. They are meant to transmit power and not generate it. So, if you have the same myth burst it now.

What Is Regulation In Transformer?

It is just the change in the percentage of voltage with or without a current load applied. If the efficiency of your device is high, it may result in a lower change in voltage, which ensures better regulation.

What Are The Different Cores Used By A Transformer?

Steel Laminated, Solid, Air are cores that are available and each of them has their own set of advantages to offer. To experience the right performance be very careful about their choice.

Where To Buy This Device From?

Indeed, the list of Transformer Manufacturers in Pune is huge, but make sure you choose the one which delivers brand loyalty and quality at the competitive market price. Trutech Products is the name that tops the list. With its location in Pune, Maharashtra, we serve our products worldwide.

So, don’t just wait, call or send web enquiry now.

The Common Materials Used For Transformer Insulation


Isolation TranformerA transformer is a device that can be trusted for supplying current from one device to another and has many qualities, one such is insulation. Proper insulation makes a transformer work smoothly.  Once you get in touch with one of the top class Transformer Manufacturers like Trutech Products, you can rest assured that the quality of the transformer is up-to-the-mark.

Have A Look At The Insulating Materials Present In A Transformer:

  • Insulating Oil – It is one of the most reliable components that work for dual purposes: electrical insulator and coolant to eliminate the heat losses. This oil is used in the transformers which have 11 kV or higher voltage. Insulation oil should never be mistaken as same as edible vegetable oil as the composition of both are very different.
  • Insulating Paper – This paper is made using vegetable fibres that are felted together to form a sheet and these fibres can be obtained from plants like cotton, straw, hemp, etc. It has the property of attaining extremely high electrical strength when put into the insulting oil under vacuum.

There are multiple other materials that are used for the insulation purpose in transformers like Insulating Tape, Pressboard, etc. The transformer is a device that serves a very long period of time if it is maintained properly. Talk to one of the eminent Transformer Manufacturers In Pune if you want to gift your industry a device that boosts the production and secures the electrical items. Trutech Products is always ready to cater to your requirements with their innovative solutions.

Difference Between A Step Up And A Step Down Transformer

step-down-transformersIf you use an industrial transformer then you don’t need a direct electrical connection between the two devices to transfer electricity. The two windings of the transformer do this working on the principle of mutual induction. Transformer Manufacturers make these industrial transformers for various purposes but we are going to talk about the difference between the two variants of industrial transformers i.e. Step up transformer and Step down transformer.  Let’s see the difference:

Step Up Transformer:

  • As the name suggests, the step-up transformer regulated low voltage and provides a high voltage to the device according to its requirement.
  • Primary winding of the iron core has fewer turns and secondary winding has 10x turns which helps in bumping up the voltage.
  • Input of voltage is lower than the output.
  • Used in devices which require high-voltage for working smoothly.

Step-Down Transformer

  • Its functioning is exactly opposite of the step-up transformer as it regulates high voltage into low voltage.
  • The second winding has lesser turns than the primary one which helps in lowering the voltage.
  • Output of voltage is lower than the input.
  • This is used in electrical devices that require low voltage supply.

Trutech Products is one of the leading Transformer Manufacturers in India and our products go through various quality tests before getting delivered to our clients. Our in-house manufacturing facility has all the latest machinery with state-of-the-art technology to make quality products. We understand that our customers trust us for quality and we always deliver it. Get in touch with us to discuss your requirements.

A Quick Description On Construction Of Isolation Transformer

The Isolation transformer is a static device, which is like all other transformers. This device blocks the DC component in the electrical signal and only allows the AC signal to flow from one circuit to other. Our company Trutech Products is one of the determined Transformer Manufacturers In India, who has become the epitome of the niche in a very short span of time.

Isolation Tranformer

The construction of the isolation transformer is similar to that of other transformers. The primary and secondary windings are wounded across the laminated core. The only difference is the isolation device that resists the direct flow of current; this isolation is governed by the capacitor, electromagnet or optical device that is installed within the body of the device. The importance of isolation devices in the transformer body is that they protect the electrical appliance and people from the shock, to avoid the short circuit.
Its sturdy construction and trouble-free operation have made it the buyer’s first choice. Are you planning to buy Isolation Transformer? Isolation Transformer Manufacturers in India is the right choice. Our products are tested on various parameters, before their shipment in the market. So, call us now or drop us your email, we are here to assist you with the best device at cost-effective rates.

What Is A Three-Phase Transformer?

 

Transformers are generally used to manage the voltage level. These devices protect the electronic appliances from the high voltage level. Every electronic appliance has some limited level above which, it breakdown. Hence, transformers are used to step up and step down the voltage as per the requirement. Our company Trutech Products is one of the largest manufacturers of this product. We provide different transformers known for their different function.

Three Phase Transformer

Three-phase Transformer is generally used to step up and step down the voltage. They can perform both the function. Unlike single phase transformer which can either step up or step down the voltage depending upon a number of turn ratio. We are well reckoned as Three-phase Transformer Manufacturers and, here to provide a high-quality range to you. The customer shows good interest in buying the Three-phase Transformer because of its small size, reasonable price, easy installation, low maintenance, and multitude functionality.

Control Transformer

Over the stretch of time, we as the reputed Control Transformer Manufacturers believes in a quality controlled workflow. Our seamless and pro-active services have earned huge appreciation from the client. Client satisfaction acts a fuel for us that propels us further maintain a fast turnaround with a next day delivery option. Our services are available in both verticals that are residential, as well as, commercial sector. So, what you are waiting for? Contact us, to get rid of annoying voltage fluctuation.