A transformer is an essential component that is designed for the purpose of transmitting current from one circuit to another. Trutech Products is counted among the most renowned and succeeding Transformer Manufacturers In India who has made the clients satisfied with the quality of products served.
Though, there are times when a transformer might go through ups and downs in terms of performance. And, if the product is not taken care of rightly, it would lead to the failure of the device. This brings us to an important matter of discussion – Causes Of Transformer Failure
It can be due to several different ways, but the main reasons behind it are as follows:
Problems In The Windings
- Voltage Surges
- Mechanical stress from through-faults
Load Tap Changer
- Malfunction of the mechanical switching mechanism
- High resistance contacts
- Contamination of insulating oil
- General ageing
- Internal moisture
- Core insulation failure
- Open ground strap
- Shorted laminations
- Core overheating
In order to protect your device against all of these problems, you need to maintain it properly. Proper testing from time to time is consequential to pre-empt any misfortune that might occur. If it is too late and your device has been severely damaged, the smartest move you can take is to replace with a new one. One of India’s triumphant Transformer Manufacturers – Trutech Products is easy to reach and give prompt delivery of products. If you want to gather any more information, feel free to speak our executives.
Transformers are intended to supply current from one circuit to another and come in different sizes and capacity power. Trutech Products is one of the paramount Transformer Manufacturers In India who have the collection of most resourceful and long-lasting devices such as Isolation, Auto, Control Transformers, etc.
Overloading and its use without breaks can harm the potential life of the device and cause it to overheat. There are various methods to cool the transformer and one such is ONAF – Oil Natural Air Forced.
The dissipation of the device can obviously be raised by enhancing the dissipating surface but its cooling can be made faster and smoother with the use of applied forced air flow on the dissipating surface. The fans blow air on the surface to cool it as it takes away the heat from the inside surface of the radiator and provides better cooling as compared to natural air. The heat dissipation rate is faster in this method so that the transformer can be put back in the normal condition.
There are multiple other methods that can help in cooling of the transformer. But if your product has been damaged beyond repair, then it is the time to get in touch with one of the leading Transformer Manufacturers such as Trutech Products and ask to be served with the transformers that fit your industrial needs perfectly. Our executives will help you with every specification related to the product. Call us to know more.
A transformer is a device that can be trusted for supplying current from one device to another and has many qualities, one such is insulation. Proper insulation makes a transformer work smoothly. Once you get in touch with one of the top class Transformer Manufacturers like Trutech Products, you can rest assured that the quality of the transformer is up-to-the-mark.
Have A Look At The Insulating Materials Present In A Transformer:
- Insulating Oil – It is one of the most reliable components that work for dual purposes: electrical insulator and coolant to eliminate the heat losses. This oil is used in the transformers which have 11 kV or higher voltage. Insulation oil should never be mistaken as same as edible vegetable oil as the composition of both are very different.
- Insulating Paper – This paper is made using vegetable fibres that are felted together to form a sheet and these fibres can be obtained from plants like cotton, straw, hemp, etc. It has the property of attaining extremely high electrical strength when put into the insulting oil under vacuum.
There are multiple other materials that are used for the insulation purpose in transformers like Insulating Tape, Pressboard, etc. The transformer is a device that serves a very long period of time if it is maintained properly. Talk to one of the eminent Transformer Manufacturers In Pune if you want to gift your industry a device that boosts the production and secures the electrical items. Trutech Products is always ready to cater to your requirements with their innovative solutions.
If you use an industrial transformer then you don’t need a direct electrical connection between the two devices to transfer electricity. The two windings of the transformer do this working on the principle of mutual induction. Transformer Manufacturers make these industrial transformers for various purposes but we are going to talk about the difference between the two variants of industrial transformers i.e. Step up transformer and Step down transformer. Let’s see the difference:
Step Up Transformer:
- As the name suggests, the step-up transformer regulated low voltage and provides a high voltage to the device according to its requirement.
- Primary winding of the iron core has fewer turns and secondary winding has 10x turns which helps in bumping up the voltage.
- Input of voltage is lower than the output.
- Used in devices which require high-voltage for working smoothly.
- Its functioning is exactly opposite of the step-up transformer as it regulates high voltage into low voltage.
- The second winding has lesser turns than the primary one which helps in lowering the voltage.
- Output of voltage is lower than the input.
- This is used in electrical devices that require low voltage supply.
Trutech Products is one of the leading Transformer Manufacturers in India and our products go through various quality tests before getting delivered to our clients. Our in-house manufacturing facility has all the latest machinery with state-of-the-art technology to make quality products. We understand that our customers trust us for quality and we always deliver it. Get in touch with us to discuss your requirements.
Transformers are generally used to manage the voltage level. These devices protect the electronic appliances from the high voltage level. Every electronic appliance has some limited level above which, it breakdown. Hence, transformers are used to step up and step down the voltage as per the requirement. Our company Trutech Products is one of the largest manufacturers of this product. We provide different transformers known for their different function.
Three-phase Transformer is generally used to step up and step down the voltage. They can perform both the function. Unlike single phase transformer which can either step up or step down the voltage depending upon a number of turn ratio. We are well reckoned as Three-phase Transformer Manufacturers and, here to provide a high-quality range to you. The customer shows good interest in buying the Three-phase Transformer because of its small size, reasonable price, easy installation, low maintenance, and multitude functionality.
Over the stretch of time, we as the reputed Control Transformer Manufacturers believes in a quality controlled workflow. Our seamless and pro-active services have earned huge appreciation from the client. Client satisfaction acts a fuel for us that propels us further maintain a fast turnaround with a next day delivery option. Our services are available in both verticals that are residential, as well as, commercial sector. So, what you are waiting for? Contact us, to get rid of annoying voltage fluctuation.
A Transformer is an electronic device that uses the principle of electromagnetic induction to transfer the electric power from one circuit to another with no changes in the voltage level. These are used to meet the need of power in different applications and therefore, they are available in different specifications and types. Transformer Manufacturers have several models of the transformers to offer that conveniently matches all your requirements and fits into your budget. Understanding the working of the transformer is vital to use it at the optimized level.
But before that, it is important for everyone to understand that transformers do not generate the electricity they transfer it from one place to another. The cores of the devices provide the controlled path for the magnetic flux to be generated, so, the current flow through the windings. Their input and output connections, winding and cores are important for the construction and proper working of the transformer. It either increases or decreases the alternate current (AC). The device has a number of features like low power loss, low maintenance need, easy installation, easy operation, low cost, etc. This static device has great demand in almost every industry because of its features and benefits it offers.
Trutech Products is the name you need to remember for buying any type of Transformer in India and any other part of the world. Being the most determined Transformer Manufacturers In India, we have extraordinary and inspiring range for the customers to match all their requirements. To place your order or to know more, you can start a direct conversation with our customer executives. We have the experienced and highly-knowledgeable team to answer your queries, so, you can make the right buying decision.
Transformers are the lifeline of any heavy-duty electrical application that feed the operating devices with the uninterrupted power supply. Trutech Products is the most desirous Transformer Manufacturers In India and across the global market areas to serve the industries with the advanced quality as well as technology products. Since we have incepted in Pune, we are ensuring that the product and service experience to the customers will be elevated with the best. We are providing high power variety of Transformers, AC & DC Chokes to the industrial users that are flexible to install and easy to work with. Our shipment delivery is always on time and we take care of safety issues better than anyone else could.
The transformers are available in the huge range to serve the industries with the better quality devices and to meet every demand. The wide range of the transformers includes Auto, Isolation, Control, Step Down, Three Phase, Rectifier, etc. Every product is designed and engineered to perform specific tasks demanded by the industries. We are engaged in fulfilling the market demands with the complete range just to please every user seamlessly.
Since 1997, we are recognized as the topmost Transformer Manufacturers in the national as well as the international market areas for our sustainable solutions. Whether you are a buyer or an installer, we team up to manufacture the best quality devices for your greater experience. Call us on the numbers provided to your screen or drop us your enquiries through the emails on the given address. We are waiting for your queries and order details.