How To Protect Transformer Against Lightening?

Transformers are the Big Wheel of the tech industry, as many of other devices revolve around it and depend on this machine for unhindered performance. If you are wondering what the main function of this electronic device is, it is as follows:

The transformer is used to transmit current from one circuit to another without bringing any change in the frequency. Trutech Products is one of the diligent Transformer Manufacturers In Mumbai that scores the highest praises coming from the buyers. We have a wide array to offer to our prestigious clients such as Isolation, Control, Auto and other kinds of transformers.

However, the transformer has a list of some enemies too which can destroy the product or obstruct its functioning. One of the major foes of the device is lightening. It is crucial to protect the machinery against lightening unless you want to jeopardize the machine.

There are three common devices that are used to pre-empt the transformer from the harmful effects of lighting and, they are mentioned below:

• Earthing screen
• Overhead ground wires
• Lightning arrestor

Though, if it is too late for you to read this information and your device has been destructed or it is too early for you to know about such happenings as you are about to buy a transformer, you are still at the right place. Being one of the avant-garde Transformer Manufacturers in Pune, we sell the best quality under considerable rates. Visit our website to explore the different options.

Advertisement

Transformer Failure And Its Indifferent Causes

A transformer is an essential component that is designed for the purpose of transmitting current from one circuit to another. Trutech Products is counted among the most renowned and succeeding Transformer Manufacturers In India who has made the clients satisfied with the quality of products served.

Though, there are times when a transformer might go through ups and downs in terms of performance. And, if the product is not taken care of rightly, it would lead to the failure of the device. This brings us to an important matter of discussion – Causes Of Transformer Failure

It can be due to several different ways, but the main reasons behind it are as follows:

Problems In The Windings

• Moisture
• Overheating
• Vibration
• Voltage Surges
• Mechanical stress from through-faults

Load Tap Changer                  

• Malfunction of the mechanical switching mechanism
• High resistance contacts
• Overheating
• Contamination of insulating oil

Bushings

• General ageing
• Contamination
• Cracking
• Internal moisture

Core Problems

• Core insulation failure
• Open ground strap
• Shorted laminations
• Core overheating

In order to protect your device against all of these problems, you need to maintain it properly. Proper testing from time to time is consequential to pre-empt any misfortune that might occur. If it is too late and your device has been severely damaged, the smartest move you can take is to replace with a new one. One of India’s triumphant Transformer Manufacturers – Trutech Products is easy to reach and give prompt delivery of products. If you want to gather any more information, feel free to speak our executives.

ONAF System Of Transformer Cooling

Transformers are intended to supply current from one circuit to another and come in different sizes and capacity power. Trutech Products is one of the paramount Transformer Manufacturers In India who have the collection of most resourceful and long-lasting devices such as Isolation, Auto, Control Transformers, etc.

Overloading and its use without breaks can harm the potential life of the device and cause it to overheat. There are various methods to cool the transformer and one such is ONAF – Oil Natural Air Forced.

Understanding ONAF:

The dissipation of the device can obviously be raised by enhancing the dissipating surface but its cooling can be made faster and smoother with the use of applied forced air flow on the dissipating surface. The fans blow air on the surface to cool it as it takes away the heat from the inside surface of the radiator and provides better cooling as compared to natural air.  The heat dissipation rate is faster in this method so that the transformer can be put back in the normal condition.

There are multiple other methods that can help in cooling of the transformer. But if your product has been damaged beyond repair, then it is the time to get in touch with one of the leading Transformer Manufacturers such as Trutech Products and ask to be served with the transformers that fit your industrial needs perfectly. Our executives will help you with every specification related to the product. Call us to know more.

Transformer FAQ’s – To Solve Out Your Queries

You must have heard people talking about transformers but do you know what this static device is and how it can benefit you. Well, if your answer is no like many others, here’s your search end. Being a Transformer Manufacturers, we are here with a FAQs section that will surely answer a few of your questions and allow you to make a wise buying decision.

What Is A Transformer?

It is a static device which is designed to use for the purpose of transmitting power from one circuit to another. It makes no change in frequency level and fulfils the need of power supply in your industry.

What Are Its Common Components?

Input/output connections, windings, cores are some of the common components that every static device have and the working of the device depends totally on them.

Do They Generate Power?

“NO” Transformers do not generate power. They are meant to transmit power and not generate it. So, if you have the same myth burst it now.

What Is Regulation In Transformer?

It is just the change in the percentage of voltage with or without a current load applied. If the efficiency of your device is high, it may result in a lower change in voltage, which ensures better regulation.

What Are The Different Cores Used By A Transformer?

Steel Laminated, Solid, Air are cores that are available and each of them has their own set of advantages to offer. To experience the right performance be very careful about their choice.

Where To Buy This Device From?

Indeed, the list of Transformer Manufacturers in Pune is huge, but make sure you choose the one which delivers brand loyalty and quality at the competitive market price. Trutech Products is the name that tops the list. With its location in Pune, Maharashtra, we serve our products worldwide.

So, don’t just wait, call or send web enquiry now.

The Common Materials Used For Transformer Insulation

---

A transformer is a device that can be trusted for supplying current from one device to another and has many qualities, one such is insulation. Proper insulation makes a transformer work smoothly.  Once you get in touch with one of the top class Transformer Manufacturers like Trutech Products, you can rest assured that the quality of the transformer is up-to-the-mark.

Have A Look At The Insulating Materials Present In A Transformer:

• Insulating Oil – It is one of the most reliable components that work for dual purposes: electrical insulator and coolant to eliminate the heat losses. This oil is used in the transformers which have 11 kV or higher voltage. Insulation oil should never be mistaken as same as edible vegetable oil as the composition of both are very different.
• Insulating Paper – This paper is made using vegetable fibres that are felted together to form a sheet and these fibres can be obtained from plants like cotton, straw, hemp, etc. It has the property of attaining extremely high electrical strength when put into the insulting oil under vacuum.

There are multiple other materials that are used for the insulation purpose in transformers like Insulating Tape, Pressboard, etc. The transformer is a device that serves a very long period of time if it is maintained properly. Talk to one of the eminent Transformer Manufacturers In Pune if you want to gift your industry a device that boosts the production and secures the electrical items. Trutech Products is always ready to cater to your requirements with their innovative solutions.

Difference Between A Step Up And A Step Down Transformer

If you use an industrial transformer then you don’t need a direct electrical connection between the two devices to transfer electricity. The two windings of the transformer do this working on the principle of mutual induction. Transformer Manufacturers make these industrial transformers for various purposes but we are going to talk about the difference between the two variants of industrial transformers i.e. Step up transformer and Step down transformer.  Let’s see the difference:

Step Up Transformer:

• As the name suggests, the step-up transformer regulated low voltage and provides a high voltage to the device according to its requirement.
• Primary winding of the iron core has fewer turns and secondary winding has 10x turns which helps in bumping up the voltage.
• Input of voltage is lower than the output.
• Used in devices which require high-voltage for working smoothly.

Step-Down Transformer

• Its functioning is exactly opposite of the step-up transformer as it regulates high voltage into low voltage.
• The second winding has lesser turns than the primary one which helps in lowering the voltage.
• Output of voltage is lower than the input.
• This is used in electrical devices that require low voltage supply.

Trutech Products is one of the leading Transformer Manufacturers in India and our products go through various quality tests before getting delivered to our clients. Our in-house manufacturing facility has all the latest machinery with state-of-the-art technology to make quality products. We understand that our customers trust us for quality and we always deliver it. Get in touch with us to discuss your requirements.

What Is A Three-Phase Transformer?

 

Transformers are generally used to manage the voltage level. These devices protect the electronic appliances from the high voltage level. Every electronic appliance has some limited level above which, it breakdown. Hence, transformers are used to step up and step down the voltage as per the requirement. Our company Trutech Products is one of the largest manufacturers of this product. We provide different transformers known for their different function.

Three-phase Transformer is generally used to step up and step down the voltage. They can perform both the function. Unlike single phase transformer which can either step up or step down the voltage depending upon a number of turn ratio. We are well reckoned as Three-phase Transformer Manufacturers and, here to provide a high-quality range to you. The customer shows good interest in buying the Three-phase Transformer because of its small size, reasonable price, easy installation, low maintenance, and multitude functionality.

Over the stretch of time, we as the reputed Control Transformer Manufacturers believes in a quality controlled workflow. Our seamless and pro-active services have earned huge appreciation from the client. Client satisfaction acts a fuel for us that propels us further maintain a fast turnaround with a next day delivery option. Our services are available in both verticals that are residential, as well as, commercial sector. So, what you are waiting for? Contact us, to get rid of annoying voltage fluctuation.

Control Transformer – A Device To Transform Your World

Control Transformer is a type of transformer that is used in a number of applications, where it is important to supply a good amount of power with no voltage regulations. These are designed to provide voltage stability during a brief period of the overload condition. Such transformers are widely used in starter circuits to handle the pressure of the direct voltage. Trutech Products are the foremost Control Transformer Manufacturers, who offer the device in a number of configurations demanded by our clients.

It ensures smooth supply of power and is a safer, more efficient and reliable option to use, than any other static device. It gives protection to the device and industry from a number of hazardous situations and ensures the smooth and stable supply of high voltage power. These are designed for industrial applications and it maximizes the inrush capabilities and output voltage regulation. These are manufactured by incorporating high-insulating material, which guarantees their long life and hassle-free performance. Additionally, these are available in different configurations, so, you should choose, as per your application demand.

In short, control transformer is the one you can rely on. In an order to place your order for the same, give us a call. We Trutech Products, being the prominent Transformer Manufacturers In India, have a comprehensive range of transformers to offer. So, if you have any special demand, you can be in touch with us. We are backed by highly talented people, who are able to deliver you what you are looking or paying for. So, call now or chat live with our executives to know about our offerings.

Understanding The Attributes Of A Three-Phase Transformer

A three-phase transformer is an electronic device that is made with the combination of three windings. The main aim of this device is to distribute the power load and transfer the limited amount of load. This transformer is made with three sets of primary and secondary winding. Each set of its wiring is interlinked with each other and connected with coils. Trutech Products is the outstanding Three-phase Transformer Manufacturers that is offering an extensive range for different industrial purposes. We have a core experience and are serving from past 20 years globally.

This transformer is mainly used in the industry that needs high voltage power, as it controls the load by lowering down the power supply. A three-phase transformer is mainly built to perform the task that requires less material. The best part of using this device is that it comes in customized option hence; a customer can customize it according to their need. The working of this device is similar to single phase transformer, as they both works with the help of interlinking coils. The main advantage of this device is that it is small and can work better than a single phase transformer.

The copper and iron coils that are present in the three-phase transformer helps to supply the power effectively, as they both are connected and can only be worked together. Trutech Products is a one-stop solution from where you can buy the desired transformer according to your requirements. We have achieved a title of leading Control Transformer Manufacturers because of our finest products. Email or call us now to book your product.

Step-Down Transformer – A Device To Step The Voltage Down As Per The Need

A Transformer plays an important role in converting the Alternating Current Voltage as per the need of the appliance and application. However, there is some difference in the working of different transformers and only a Step-Down Transformer is the one, which is mainly designed for the purpose of reducing the voltage to a level, which is actually required by your device. The primary voltage of such static device is always greater than the secondary one, which helps to Step-Down the voltage level applied to it. You should install the device to control the problem of high voltage as it ensures the reduction in that, which further take care of your appliance and application as well.

Step-Down Transformer Manufacturers offers you the right solution that works like a charm for your application. This type of transformer gains great popularity in the market for its unique feature and advanced functions. Sometimes because of its function of decreasing the voltage level, it is considered as a voltage ratio device. The design of the step-down transformer is to withstand electrical impulses and thermal and dynamic stresses. It ensures low power loss and it also creates less noise than step up or any other type of transformer.

Its installation, operation, and maintenance are easy and very handy. Also, the compact design ensures that it occupied very little space at your worksite. Trutech Products is one of the most popular and highly praised Control Transformer Manufacturers in India that has its roots in the niche, since 1997 and gained popularity for serving the best quality transformers. Our complete range is advanced and one can easily make a selection among all its types. Call us or drop your email to get more details.